Tweet
Hi,
aaeehhmm, I feel awful about it but I posted the wrong file (thanks Steve C). Haig needed the cfg-file. :-))
I think the best is to sum up the former thread in short again:
" ... tried to get the TechDemo running for a few hours. The Demo starts, menue is o.k. and if I try to start the demo itself, it starts loading and stops at about half the way !! At first tried to start it at different resolutions and colour depths (from 640x480 - 1024x768 with 16 to 24 to 32 Bit). Nothing helped. Now tried to modify the TechDemo`s cfg.file. Changed to 800x600 with different settings of rendering depths. Then I set my AGP aperture size from 256 MB to 128 MB to 64 MB. Nothing changed. OS is fresh installed after format C: ! But Colin McRae for example runs fine. My Aperture Size now is 128 MB again and desktop is at 1024x768 @ 16Bit."
So far so good. Now for the cfg-file you needed Haig:
// Matrox G400 TechDemo Config
scene_name A
relations_path data
database_path data
// mouse sensitivity on free fly mode
mouse_sensitivity_h 0.03
mouse_sensitivity_v 0.03
// set this to 0 to skip the menu
run_menu 1
// sound on/off
sound 1
// in a multimonitor/card system you can set this one to 3 to use the other card
device 1
// resolution
screen_resolution 640 480
// 0 = high colour, 1 = true colour
render_depth 1
// 0 = 16bit, 1 = 32bit
zbuffer_depth 1
//fairy lighting tweaks
fairy_colour_r 3 2 1.0
fairy_colour_g 1 4 0.4
fairy_colour_b 5 3 1.5
fairy_radius 0.2 1.5 2.0
// you can use this to rescale the textures at loading time
texture_scale 1.0
// name of the log file
log_filename matrox.txt
End of file.
Sorry again for my little mistake. Hopefully all of you (and esp. Haig) show up again so we get the TechDemo to run.
Greetings
MK
ASUS P2B (1010), Celeron 266@412 MHz (4x103), 128 MB PC100, OEM G400 16MB SH (PD 5.13), IBM DHEA 6,4 GB U-ATA, SB PCI64, Mitsumi CR-4801TE, Pioneer 36x slot-in, Iiyama Vision Master Pro 400, Plustek OpticPro 9636T, Win`95B.
[This message has been edited by MK (edited 08-02-99).]
aaeehhmm, I feel awful about it but I posted the wrong file (thanks Steve C). Haig needed the cfg-file. :-))
I think the best is to sum up the former thread in short again:
" ... tried to get the TechDemo running for a few hours. The Demo starts, menue is o.k. and if I try to start the demo itself, it starts loading and stops at about half the way !! At first tried to start it at different resolutions and colour depths (from 640x480 - 1024x768 with 16 to 24 to 32 Bit). Nothing helped. Now tried to modify the TechDemo`s cfg.file. Changed to 800x600 with different settings of rendering depths. Then I set my AGP aperture size from 256 MB to 128 MB to 64 MB. Nothing changed. OS is fresh installed after format C: ! But Colin McRae for example runs fine. My Aperture Size now is 128 MB again and desktop is at 1024x768 @ 16Bit."
So far so good. Now for the cfg-file you needed Haig:
// Matrox G400 TechDemo Config
scene_name A
relations_path data
database_path data
// mouse sensitivity on free fly mode
mouse_sensitivity_h 0.03
mouse_sensitivity_v 0.03
// set this to 0 to skip the menu
run_menu 1
// sound on/off
sound 1
// in a multimonitor/card system you can set this one to 3 to use the other card
device 1
// resolution
screen_resolution 640 480
// 0 = high colour, 1 = true colour
render_depth 1
// 0 = 16bit, 1 = 32bit
zbuffer_depth 1
//fairy lighting tweaks
fairy_colour_r 3 2 1.0
fairy_colour_g 1 4 0.4
fairy_colour_b 5 3 1.5
fairy_radius 0.2 1.5 2.0
// you can use this to rescale the textures at loading time
texture_scale 1.0
// name of the log file
log_filename matrox.txt
End of file.
Sorry again for my little mistake. Hopefully all of you (and esp. Haig) show up again so we get the TechDemo to run.
Greetings
MK
ASUS P2B (1010), Celeron 266@412 MHz (4x103), 128 MB PC100, OEM G400 16MB SH (PD 5.13), IBM DHEA 6,4 GB U-ATA, SB PCI64, Mitsumi CR-4801TE, Pioneer 36x slot-in, Iiyama Vision Master Pro 400, Plustek OpticPro 9636T, Win`95B.
[This message has been edited by MK (edited 08-02-99).]
Comment